Hayter Mowers Envoy 36 User Manual

(English Version)CODE FROM SERIAL NO:100E 270000001 HANDBOOK: 111-1074(REV .A.)ISSUE: 01.10.06OWNER'S HANDBOOKEnvoy 36CODE100E111-1074(A) 1/11/0

1.10ASSEMBLING THE MOWERRemove the mower from the packaging and check that the followingitems have been supplied correctly. If any items are missing c

1.11Forward TravelPosition the mower on the grass area to be cut. Carefully uncoil thesupply cable clear of the mower. Ensure that the mains socket is

Stopping Release the bail arm to stop the motor.WARNING: AVOID ACCIDENTS - The cutterblade may contin-ue to rotate after the mower is switched offMove

1.13To empty the grassbag raise the rear deflector and pass the grassbagunder the handlebar and lower the rear deflector to rest against the rearof th

1.14WARNING: PREVENT ACCIDENTS -Take extreme care do notmow across the supply cable. If this should occur, switch off immedi-ately and disconnect the

Overloading Protection1.15Do not let the motor labour or slow down through being overloaded inwork. When this situation occurs, raise the front of the

1.16There is very little work to do this month apart from brushing awayleaves. Keep off the grass if frozen or waterlogged.Rake the grass thoroughly.

1.17Keep mowing regularly and watering as necessary. Fill any crackscaused by drought with a mixture of sharp sand and soil. In dry weath-er condition

1.18Follow the hourly or calendar intervals, whichever occurs first. Morefrequent service will be required if working for prolonged periodsunder dusty

1.19Remove grass debris from the top and underside of the deck housingimmediately after use.Regularly check that all securing nuts and bolts are tight

1.2MAIN FEATURES /SPECIFICATIONSCode 100E Supply 230VRated Input 1.4 kWFuse Rating 13AWeight 23 KgCutterblade Speed 2800 rpmCutting width 360mmCutt

1.2012Turn the mower on its side.Firmly grip the end of the cutterblade (2) with a gloved hand andremove bolt (1). When replacing ensure that the new

30°-45°Cutterblade SharpeningA slightly worn cutterblade may be re-sharpened. Both blade edgesmust be sharpened equally to ensure balance. Sharpen t

1.22Handlebar storage: To collapse the handlebar first unscrew the twotop securing knobs to allow the top section of the handlebar to pivotforward to

Test socket by plugging in anoth-er appliance.Remove mower plug and checkRCCB action. Check the supplycable for any obvious signs ofdamage and replace

Motor vibrates excessively.Uneven cutDischarge chute blocks.Mower is hard to push.Poor grass collection.1.24Mounting bolts loose.Cutterblade bolt loos

EC DECLARATION OF CONFORMITYManufactured for: HAYTER LIMITED,Address: Spellbrook, Bishop’s Stortford, Herts. CM23 4BU. ENGLANDdeclare that the lawnmow

1 Motor HY100001 12 Capacitor HY100002 13 Underdeck HY100003 14 Throw Plate HY100004 15 Wheel - Wide Assy HY100506 26 Bearing - Wheel HY100033 127 Hub

42 Knob - HOC HY100039 143 HOC Plate 111-0539 144 Washer - Spring M8 100119 445 Grassbag - Fabric/base 100513 146 Frame - Grassbag 100016 147 Top - Gr

123455666777788666666668891010101011121314141414151516151517181920212319151515152425291557153031323335363737373727383838383940414243454661474958585851

1.29NOTESNotes:-111-1074(A) 1/11/06 11:33 Page 1.29

1.2 Main Features/Specifications1.3 Contents1.4 Introduction1.5 Warranty1.6 - 1.9 Safety Precautions 1.9 Safety Symbols1.9 Control Symbols1.10 Assembl

1.30NOTESNotes:-111-1074(A) 1/11/06 11:33 Page 1.30

1.31NOTESNotes:-111-1074(A) 1/11/06 11:33 Page 1.31

Serial No:Motor Type:- 230VDate of Sale:-Your Local Dealer:-CUSTOMERINFORMATION111-1074(A) 1/11/06 11:33 Page 1.32

1.4INTRODUCTIONThank you for purchasing a Hayter mower. The following pages are designed to help you gainsafe and efficient service from your mower.I

1.5WARRANTYLIMITED WARRANTYHayter Limited warrants to the original user/purchaser that this unit shall be free fromdefects in material or workmanship

1.6SAFETY PRECAUTIONSThis safety alert symbol indicates important safety messages. Whenyou see this symbol be alert to the possibility of injury. Care

1.7PRECAUTIONSSAFETYAlways ensure that the mower is in a safe operating condition.Frequently check all nuts, bolts and screws for tightness. Use only

1.8Use extreme caution when reversing or pulling the mower towards you.Switch off if the mower has to be tilted for transportation when cross-ing surf

1.9SAFETY PRECAUTIONSSafety SymbolsSafety Alert - Be aware to thepossibility of injury.Danger of severing toes or fin-gers in cutting mechanism.Carefu