Hayter Mowers Envoy 36 User Manual download pdf (Page 10)

1.10

ASSEMBLING THE MOWER

Remove the mower from the packaging and check that the following

items have been supplied correctly. If any items are missing contact,

your local Hayter dealer.

1. Instruction Sheet 2. Grassbag Frame 3. Grassbag Top Cover

4. Grassbag Fabric 5. Supply Cable

To prevent accidents cut off the long ribbon attached to the grass-

bag and discard.

Unscrew the handlebar securing knobs sufficiently to allow the handle-

bar to pivot. Unfold the handlebar to the operating position. Tighten all

handlebar knobs to secure the handlebar in position.

Take care to ensure that the power cable does not become snagged at

the pivot points.

Once the grassbag is assembled. Raise the rear deflector, pass the

grassbag under the handlebar and hook in position. Lower the deflec-

tor to rest on the grassbag.

Route the supply cable loosely across to the cable cleat on the left side

of the handlebar. Make a loop in the supply cable and secure to the

cable cleat.

Handlebar

Delivery Checklist

Grassbag Attachment

Supply Cable

111-1074(A) 1/11/06 11:33 Page 1.10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

No comments

Hayter Mowers Envoy 36 User Manual Page 10