Hayter Mowers Envoy 36 User Manual download pdf (Page 15)

Overloading Protection

1.15

Do not let the motor labour or slow down through being overloaded in

work. When this situation occurs, raise the front of the mower slightly

by bearing down on the handlebar, allow the motor to reach maximum

speed and proceed to mow at a slower pace. Alternatively readjust to a

higher cut position. If the motor continues to labour, switch off and

remove the plug from the mains supply. Remove and empty the grass-

bag. Examine the discharge chute and remove any blockage. Turn the

machine on its side and clear any obstruction from the cutterblade and

the underside of the mower deck. Place the machine upright and

replace the grassbag. Readjust to a higher cut position if necessary.

Restart the mower and proceed to mow at a pace which does not over-

load the mower.

IMPORTANT: PREVENT DAMAGE - DO NOT continue to

operate the motor in an overloaded condition. If this does occur,

stop mowing and allow the motor to run at maximum speed for

one minute. This will allow the motor to cool down to its normal

working temperature.

MOWERTHEOPERATING

111-1074(A) 1/11/06 11:33 Page 1.15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

Hayter Mowers Envoy 36 User Manual Page 15